Quietness is an essential design element in a household dishwasher and bosch have made sure that their machines are among the quietest in the world. The last thing you need to hear as you try to sleep or worse still over the television is a dishwasher working away sounding like an aircraft engine. Many review sites and consumer surveys will show that these machines are top in the ratings for low noise levels. One of the major reasons for this is the way that two electric motors are incorporated into the machines design rather than one which is what you find in most dishwashers. Using two smaller suspended motors is quieter than using one larger one and also reduces vibration which is another source of noise. The second reason for them being so quiet is cotton insulation along with a bitumen coating on the sides of the machine.

Heating the water is one of the most expensive parts of running a dishwasher sequence.

Traditionally an element at the bottom of the appliance that is submerged when the machine is filled is used to heat the water all at the same time and this use’s up a lot of energy and it takes time to get the water to the required temperature. The system designed by bosch use’s a chamber with small heating coils located at the water inlet to quickly heat the water to the correct temperature as it enters the machine thereby saving both time and money.

Sensors are used throughout the dishwasher cycle to keep the amount of soap, water and energy used to as low a level as possible. One sensor detects load size or how many dishes are in the unit and can distinguish between plates and pots. As the cycle runs another sensor can actually detect how much more cleaning is required by measuring how the clear the water is and another sensor checks constantly the water temperature.

The sensors readings are used by the machines processor to control and adjust the washing cycle length, temperature, detergent usage and rinse time. This allows the best possible wash at the minimum cost saving you time and money and being more energy efficient.
Bosch also has a unique way of drying the dishes at the end of the wash and rinse cycle that does not involve a separate drying cycle. The drying cycle is actually built into the rinse cycle by making the final rinse water very hot. It then condenses on the walls of the dishwasher leaving the dishes dry and the reason this happens is because the washer walls are made of stainless steel which is a cool material. It is a combination of cool stainless steel and very hot water that causes the condensation effect that effectively dries the dishes.

Leaks in an appliance can cause a lot of damage and repairing this damage can be very expensive. Bosch dishwashers have an Aquastop leak system built into them which consists of a water sensor located in a small well at the lowest part of the machine. If water is detected within the machine then something is leaking and the machine automatically shuts of the inlet and drains the machine before any serious damage can be done.

While dishwashers are being commonly used everywhere, there a number of upgraded features available now. Currently, the dishwashers that are being manufactured have a drop down door which gives full view and access to the inside of it, once opened. The inside of a dishwasher consists of a sink that gets filled with water in which dishes are washed. This can be made of either plastic or stainless steel. Stainless steel tubs are preferable as they are better able to resist hot water that is used to wash the dishes. Also stainless steel maintains more heat during the drying process.

Moreover, a stainless steel tub looks pleasant to the eyes and is classier than plastic ones. While the dishes are being washed, stainless steel also leads to lesser noise being made: a quality a lot of people look for. The child lock feature is new and highly useful for homes where there are a number of children present.

A child lock prevents children from opening the door of the dishwasher while the process of washing is going on. This protects from accidents taking place, as the water inside is most of the time hot and contains soap.

Some newly manufactured dishwashers contain microprocessor controlled sensors that identify how dirty the dishes are and determine the temperature of water along with soap accordingly. This way you will not be wasting extra water, detergent or time on dishes which do not require these in large amounts. Moreover, you can now get your dishes washed even while you are not at home. Some dishwashers have a feature which allows the user to set a particular time of the day when the wash cycle is supposed to start. This means the process can also start on its own and finish while the user is not even at home and the dishes will be ready to be used.

How to replace the motor-pump assembly in a Whirlpool or Kitchenaid dishwasher.
Video Rating: 4 / 5

More Whirlpool Dishwasher Troubleshooting Articles